08.11.2008, 19:03
Beim Flashen wurde doch ein Ordner "Restore" oder so ähnlich erstellt, oder nicht? Das ist deine originale Firmware. du musst doch auch eine .txt Datei gehabt haben, wo auch drin steht, wie man die Firmware wiederherstellt.
Bevor du wieder irgendwas rumflashst, musst du erstmal einen Restore machen. Hier der Auszug aus der Readme.txt von C4EVA, habe die stellen rot markiert und was in blau dabeigeschrieben.
Technical details
------------------------
Defeats all current and some future Xbox Live detection attempts.
Thanks to all the beta testers,everyone involved for without their effort this would not have been possible. Keep up the good work everyone. Thanks also go to Fuzzylogic and GAryOPA.
Commodore4Eva@gmail.com
Always recommended: If your drive is flashed USE A RESTORE FIRST Soll heisen, erst restore machen :!:
(Use the restore included on this package)
Two Commands (for flashing use only one: FlashIX):
FLASHIX.BAT: Flashes your drive with iXtreme 1.2 Fw Stealth (Media Detect 2,
and Firwmare Stealth, (NO F900 Core)
RESTORE.BAT: Return your drive to original State, even if you have
firmware stealth in your drive Diese Datei musst du ausführen, natürlich nur, wenn du diese Firmware verwendest. Aber bei den anderen sollte es auch so sein.
*RECOMENDATION: If you have flashed your drive in the past use RESTORE
first. If it is a brand new drive use directly the Flash command you
like.
Flashing your drive
-------------------
FLASHIX.BAT automatically makes a complete backup of your firmware system
* To FLASH a drive, it must be in "Mode B" and have "Drive Letter"
* Then just run FLASHIX from "Command Prompt" while inside windows
* Prompt must be at the same directory with the rest of the files!
* FLASHIX needs two variables, the assigned "Drive Letter", and any 4
numbers for the BACKUP directory, use a new unique number like 1672
- This is used to make your BACKUP directory!
- For Example: FLASHIX.BAT H 1672
- Will cause the FLASH after running to have, a BACKUP directory
"X16S-1672" and the program will store FIVE firmware files:
---- key.bin ---- DRIVE KEY /// DRIVE KEY
---- was.bin ---- Your drive before FLASH
---- gdrXX.bin ---- The untouch original fw
---- XX_23.bin ---- The patched iXtreme fw
---- now.bin ---- Your drive after FLASH!
- Where the XX in the above names will be the version of your Hitachi
* Program will not start unless a BACKUP is correctly made and stored!
* Flash will auto-detect your firmware build of your Hitachi drive.
* You can flash any drive, even "v1.1" or "f900" or your own hacks.
* System will check flashed firmware, and redo until 100% completed.
* Once you get the PASS / DONE line, you can shut-down the system.
Bevor du wieder irgendwas rumflashst, musst du erstmal einen Restore machen. Hier der Auszug aus der Readme.txt von C4EVA, habe die stellen rot markiert und was in blau dabeigeschrieben.
Technical details
------------------------
Defeats all current and some future Xbox Live detection attempts.
Thanks to all the beta testers,everyone involved for without their effort this would not have been possible. Keep up the good work everyone. Thanks also go to Fuzzylogic and GAryOPA.
Commodore4Eva@gmail.com
Always recommended: If your drive is flashed USE A RESTORE FIRST Soll heisen, erst restore machen :!:
(Use the restore included on this package)
Two Commands (for flashing use only one: FlashIX):
FLASHIX.BAT: Flashes your drive with iXtreme 1.2 Fw Stealth (Media Detect 2,
and Firwmare Stealth, (NO F900 Core)
RESTORE.BAT: Return your drive to original State, even if you have
firmware stealth in your drive Diese Datei musst du ausführen, natürlich nur, wenn du diese Firmware verwendest. Aber bei den anderen sollte es auch so sein.
*RECOMENDATION: If you have flashed your drive in the past use RESTORE
first. If it is a brand new drive use directly the Flash command you
like.
Flashing your drive
-------------------
FLASHIX.BAT automatically makes a complete backup of your firmware system
* To FLASH a drive, it must be in "Mode B" and have "Drive Letter"
* Then just run FLASHIX from "Command Prompt" while inside windows
* Prompt must be at the same directory with the rest of the files!
* FLASHIX needs two variables, the assigned "Drive Letter", and any 4
numbers for the BACKUP directory, use a new unique number like 1672
- This is used to make your BACKUP directory!
- For Example: FLASHIX.BAT H 1672
- Will cause the FLASH after running to have, a BACKUP directory
"X16S-1672" and the program will store FIVE firmware files:
---- key.bin ---- DRIVE KEY /// DRIVE KEY
---- was.bin ---- Your drive before FLASH
---- gdrXX.bin ---- The untouch original fw
---- XX_23.bin ---- The patched iXtreme fw
---- now.bin ---- Your drive after FLASH!
- Where the XX in the above names will be the version of your Hitachi
* Program will not start unless a BACKUP is correctly made and stored!
* Flash will auto-detect your firmware build of your Hitachi drive.
* You can flash any drive, even "v1.1" or "f900" or your own hacks.
* System will check flashed firmware, and redo until 100% completed.
* Once you get the PASS / DONE line, you can shut-down the system.
In 98,9 % der Fälle sitzt das Problem vor dem PC!!!!


