CPLD Files Corona Hack -> XilinX Chips

[Screamo]

Hier die Corona hack Files, zum flashen auf standart xilinx Glitch Chips.

Eine Einbauanleitung liegt auch dabei. Es wird zusätzlich ein Quarz mit 48mhz benötigt.

WARNING*********WARNING*********WARNING*********WARNING*********
PLEASE BE AWARE THAT THE XC264A BASED RGH HACK FOR THE CORONA
IS NOT VERY RELIABLE AND DOES NOT GLITCH VERY FAST AT ALL.
THE HACK IS MADE AVAILABLE SO YOU CAN HAVE A PLAY WITH THIS
YOURSELF AND SEE WHAT RESULTS YOU CAN ACHIEVE.

THIS IS WHY WE DESIGNED THE COOLRUNNER 3, IT HAS BEEN
FINE TUNED USING A MUCH MORE ADVANCED DESIGN AND
GLITCHES VERY RELIABLY AND VERY FAST. WE DO NOT OFFER ANY
GUARANTEES OR SUPPORT WITH THE XC264A CORONA HACK.
WARNING*********WARNING*********WARNING*********WARNING*********

To get this working on CoolRunner Rev A B or C you simply have
to add a 48.000MHz crystal.

If you have Rev A or Rev B remember to remove C15.

It’s a bit cheap and cheerful and the hack isn’t that good with
the limitations of the older gen XC264A hardware but here it is
anyway.

The crystal has to be good quality – not some cheap crappy one
as it will not work.

These work very well:

http://ie.farnell.com/jsp/search/product...KU=1640968

48.000MHz crystal wiring to the CoolRunner:
PIN 1,4 to 3v3
PIN 2 to GND
PIN 3 to B

We have included 6 files with different timings

tx_corona_0_2.xsvf
tx_corona_0_3.xsvf
tx_corona_1_2.xsvf
tx_corona_1_3.xsvf
tx_corona_2_2.xsvf
tx_corona_2_3.xsvf

The most important point is the CPU_RST – this will make the
difference between a 30 second glitch and a 30 minute glitch.

You may want to try using the CPU RESET CLEANER addon that we
released – it works very well with RGH1 and RGH2.

We also recommend you try the different wire layouts as per the
original CoolRunner instructions.

CoolRunner 3 is in production right now – you will get to see
how Slim glitching should be done

Thanks to GliGli & Tiros for the original RGH exploit.

- Team Xecuter

quelle: xbins.org

0 Danksagungen