Zitat:Overview: This release will allow for any console running the latest version of
FreeStyleDash 3.0b rev775 or higher to remotely launch games. iPad version will
follow after a couple of weeks. The reason for this is to ensure that any bugs
found by users are from code and not related to the device being an iPad. Please
read below for a full set of installation instructions.


Requirements: A jailbroken device on iOS 6.0 or higher with AppSync installed.

Installation:
1 ) Use any method available to install the ipa file (I used iFunBox).
2 ) Launch the FS3 Mobile icon that appears.
3 ) Select “More” and then “Settings”.
4 ) Enter the IP address of the console.
5 ) The default username and password for FreeStyleDash is “f3http”.
6 ) Ensure that the console is on and FreeStyleDash is currently running.
7 ) Navigate to one of the sections such as “360” and pull down to refresh.
8 ) Select a game to launch.

Optional: At this point the user may select another game to play or return to the
home screen and select the FreeStyleDash logo to return to FreeStyleDash on the console.

Reporting Bugs:
Please report bugs found to #FreeStyleDash on EFNet.

Zitat:Today we are releasing F3 Rev735, LiNK Beta 3 including WebUI.
This update is only available to consoles that are linked to a jqe360.com account right now.
Tomorrow will be a mass push and later this week an offline file will be available.

Here are just a few of the new features.


**** Freestlye 3 Beta Rev 735 - Released March 5th, 2013 ****
**** Thanks go out to our dedicated beta testers and the community!
**** Quick Change Info: Streamlined Plugin for less overhead
**** Quick Change Info: Notes in WebUI
**** Quick Change Info: In game Screenshots
**** Quick Change Info: Better user Management
**** Quick Change Info: Now scan and launch NxE Containers
**** Quick Change Info: Can create rooms in HUD
**** Quick Change Info: RSS Feed in HUD.
**** Enjoy!

[video]http://www.youtube.com/watch?v=jhkuVJq0a10&feature=player_embedded[/video]

Zitat:Overview: This release will allow for fake animations in the form of WMV 9 encoded videos to be played on the console prior to showing the dashboard. Since this file is only loaded after the console is ready there will be a minor increase in boot times. This has no impact on glitch times since the glitch occurs prior to this file ever being loaded. The Delay and Calibration settings are designed to allow the user to tweak the video to their specific system and display. This tweaking makes it so that the video does not get cut off. Please read below for a full set of instructions:

Zitat:Intallation & Configuration:
Important: Do NOT attempt to delete bootanim.xex if you are unable to restore to a previous NAND dump via hardware.
Requirements: DashLaunch v3.03 is required for this to work.
Installation:
1) Copy over all files in the archive to the HDD or USB of the 360.
2) Edit your launch.ini to have fakeanim = point to the fakeanim.xex
3) Reboot the console and make sure the application runs. Ignore the Red Screen being present for a while.
4) Once you have verified the application is launched remove bootanim.xex** from the consoles Flash. (Use FS3 or FTP).
5) Reboot the console and pay attention to how long the red screen is displayed.
6) Calibration takes place in the fakeanim.ini file and should be checked with a cold boot in order to force the GPU to initialize.
7) Once calibration is complete edit the fakeanim.ini and set calibration to 0
Calibration Notes:
* To adjust the length the red screen is shown. Add to the number to increase the time take delay. Take away to decrease it.
* The delay function is used to ensure the video does not get cut off during the monitor and GPU starting each « delay » is 250ms. Valid entries are between 0 and 100.
* For slims start around 5.
* For Phats start around 13.
* The goal is to get the red screen to show for the least amount of time possible on the Evil Laugh wmv when performing a cold boot.

Zitat:**** Freestlye 3 Beta - Released September 21st, 2012 ****

**** Thanks go out to our dedicated beta testers and the community!
**** Quick Change Info: New and improved HTTP server
**** Quick Change Info: Coverflow, Kinect integration
**** Quick Change Info: Rebranded to Freestyle 3 or F3
**** Enjoy!


*********** READ THIS **************
This requires a fresh install it is not FSD2 compatible and requires a FRESH DB.
IF YOU INSTALL OVER YOUR OLD DB IT WILL DELETE IT
*********** READ THIS *************

******** F3.0.58 **********
Added coverflow
Added Kinect integration
New HTTP Server
built on FSD Core
Indie title Support. < SEE INSTRUCTIONS BELOW >
fixed weather API to use world weather

**NOTE** Indie titles scan into Homebrew section
**NOTE** new http credentials default to f3http
**NOTE** if installed over FSD will delete your DB
**NORE** troubles and bugs should be reported to our forums www.realmodscene.com

********** INDIE INSTRUCTIONS ***********
ndie titles REQUIRE dashlaunch with fakelive to be installed
Indie titles MUST be in a Microsoft Approved content location
AKA hdd1:\content\0000000000000000\584E07D2\00000002
Approved drives for content are HDD1: MU: USBMU: INTMU:
You MUST HAVE Kinect data installed
you MUST have the Indie Launcher TitleUpdate installed
The indie titles will scan into Homebrew.

Zitat:WARNING*********WARNING*********WARNING*********WARNING*********
PLEASE BE AWARE THAT THE XC264A BASED RGH HACK FOR THE CORONA
IS NOT VERY RELIABLE AND DOES NOT GLITCH VERY FAST AT ALL.
THE HACK IS MADE AVAILABLE SO YOU CAN HAVE A PLAY WITH THIS
YOURSELF AND SEE WHAT RESULTS YOU CAN ACHIEVE.

THIS IS WHY WE DESIGNED THE COOLRUNNER 3, IT HAS BEEN
FINE TUNED USING A MUCH MORE ADVANCED DESIGN AND
GLITCHES VERY RELIABLY AND VERY FAST. WE DO NOT OFFER ANY
GUARANTEES OR SUPPORT WITH THE XC264A CORONA HACK.
WARNING*********WARNING*********WARNING*********WARNING*********

To get this working on CoolRunner Rev A B or C you simply have
to add a 48.000MHz crystal.

If you have Rev A or Rev B remember to remove C15.

It’s a bit cheap and cheerful and the hack isn’t that good with
the limitations of the older gen XC264A hardware but here it is
anyway.

The crystal has to be good quality – not some cheap crappy one
as it will not work.

These work very well:

http://ie.farnell.com/jsp/search/product...KU=1640968

48.000MHz crystal wiring to the CoolRunner:
PIN 1,4 to 3v3
PIN 2 to GND
PIN 3 to B

We have included 6 files with different timings

tx_corona_0_2.xsvf
tx_corona_0_3.xsvf
tx_corona_1_2.xsvf
tx_corona_1_3.xsvf
tx_corona_2_2.xsvf
tx_corona_2_3.xsvf

The most important point is the CPU_RST – this will make the
difference between a 30 second glitch and a 30 minute glitch.

You may want to try using the CPU RESET CLEANER addon that we
released – it works very well with RGH1 and RGH2.

We also recommend you try the different wire layouts as per the
original CoolRunner instructions.

CoolRunner 3 is in production right now – you will get to see
how Slim glitching should be done

Thanks to GliGli & Tiros for the original RGH exploit.

- Team Xecuter

Zitat: - add SHDN command to ftp command list, shuts down xbox

- added UTF8 to FEAT, some clients like filezilla should be able to show proper names now

Zitat: - update drive list to include trinity mu for multi.ini

- allow GOD/NXE/EXTRACTED disk rips for auto disk switching

*note: the auto functionality here is replicated in dash launch, without the ability to use ini files