<![CDATA[Xbox Hilfe Forum - Kernel / Rebooter]]> https://xbox-hilfe-forum.de/ Mon, 02 Nov 2026 14:42:20 +0000 MyBB <![CDATA[xeBuild 1.18]]> https://xbox-hilfe-forum.de/showthread.php?tid=27858 Mon, 21 Nov 2016 17:00:28 +0000 Millhouse]]> https://xbox-hilfe-forum.de/showthread.php?tid=27858 xeBuild_1.18

>>Das Team hinter xeBuild veröffentlicht eine neue Version, welche nun den Kernel 17511 unterstützt.
Zitat:1.18
- add 17511


.zip   xeBuild_1.18.zip (Größe: 1.14 MB / Downloads: 16) ]]> xeBuild_1.18

>>Das Team hinter xeBuild veröffentlicht eine neue Version, welche nun den Kernel 17511 unterstützt.
Zitat:1.18
- add 17511


.zip   xeBuild_1.18.zip (Größe: 1.14 MB / Downloads: 16) ]]> <![CDATA[xeBuild GUI Version 2.098 für Kernel 17511]]> https://xbox-hilfe-forum.de/showthread.php?tid=27901 Sun, 20 Nov 2016 17:20:52 +0000 Millhouse]]> https://xbox-hilfe-forum.de/showthread.php?tid=27901 Swizzy's xeBuild GUI Version 2.098


>>Swizzy's veröffentlicht xeBuild GUI Version 2.098, welches nun den Kernel 17511 unterstützt.



[Bild: xeBuildGUI2.098.jpg]

Zitat:* 2098 *

*********
- Updated: Now using xeBuild 1.18
- Updated: Now using Dashlaunch 3.18
- Updated: Now building 2.0.17511.0[/url]


.rar   xeBuild_GUI_2.098.rar (Größe: 21.91 MB / Downloads: 35) ]]> Swizzy's xeBuild GUI Version 2.098


>>Swizzy's veröffentlicht xeBuild GUI Version 2.098, welches nun den Kernel 17511 unterstützt.



[Bild: xeBuildGUI2.098.jpg]

Zitat:* 2098 *

*********
- Updated: Now using xeBuild 1.18
- Updated: Now using Dashlaunch 3.18
- Updated: Now building 2.0.17511.0[/url]


.rar   xeBuild_GUI_2.098.rar (Größe: 21.91 MB / Downloads: 35) ]]> <![CDATA[Dash Launch 3.18]]> https://xbox-hilfe-forum.de/showthread.php?tid=27894 Sun, 20 Nov 2016 17:01:56 +0000 Millhouse]]> https://xbox-hilfe-forum.de/showthread.php?tid=27894 Dash Launch v3.18 : support für Kernel 17511

Zitat:V3.18
- add 17511


.zip   dash_launch_v3.18.zip (Größe: 2.44 MB / Downloads: 19) ]]> Dash Launch v3.18 : support für Kernel 17511

Zitat:V3.18
- add 17511


.zip   dash_launch_v3.18.zip (Größe: 2.44 MB / Downloads: 19) ]]> <![CDATA[Dash Launch 3.17]]> https://xbox-hilfe-forum.de/showthread.php?tid=27795 Tue, 05 Apr 2016 01:30:51 +0000 Millhouse]]> https://xbox-hilfe-forum.de/showthread.php?tid=27795 Dash Launch v3.17 : support für Kernel 17502

Zitat:V3.17
- add 17502
- minor bugfixes


.zip   dash_launch_v3.17.zip (Größe: 2.44 MB / Downloads: 44) ]]> Dash Launch v3.17 : support für Kernel 17502

Zitat:V3.17
- add 17502
- minor bugfixes


.zip   dash_launch_v3.17.zip (Größe: 2.44 MB / Downloads: 44) ]]> <![CDATA[xeBuild 1.17]]> https://xbox-hilfe-forum.de/showthread.php?tid=27794 Tue, 05 Apr 2016 01:26:42 +0000 Millhouse]]> https://xbox-hilfe-forum.de/showthread.php?tid=27794 xeBuild_1.17

>>Das Team hinter xeBuild veröffentlicht eine neue Version, welche nun den Kernel 17502 unterstützt.
Zitat:1.17
- fix a long standing bug when zerofilling bad blocks within the reserve block area (thanks GoJohnny!)
- add 17502
- many internal changes were made to make the code more portable, if you run into a major issue this is probably why
please report it, an immediate solution should be to use the previous version's exe


.zip   xeBuild_1.17.zip (Größe: 1.11 MB / Downloads: 8) ]]> xeBuild_1.17

>>Das Team hinter xeBuild veröffentlicht eine neue Version, welche nun den Kernel 17502 unterstützt.
Zitat:1.17
- fix a long standing bug when zerofilling bad blocks within the reserve block area (thanks GoJohnny!)
- add 17502
- many internal changes were made to make the code more portable, if you run into a major issue this is probably why
please report it, an immediate solution should be to use the previous version's exe


.zip   xeBuild_1.17.zip (Größe: 1.11 MB / Downloads: 8) ]]> <![CDATA[Xebuild GUI 2.098]]> https://xbox-hilfe-forum.de/showthread.php?tid=27793 Tue, 05 Apr 2016 01:22:13 +0000 Millhouse]]> https://xbox-hilfe-forum.de/showthread.php?tid=27793 Swizzy's xeBuild GUI Version 2.098


>>Swizzy's veröffentlicht xeBuild GUI Version 2.098, welches nun den Kernel 17502 unterstützt.



[Bild: xeBuildGUI2.098.jpg]

Zitat:* 2098 *

*********
- Updated: Now using xeBuild 1.17
- Updated: Now using Dashlaunch 3.17
- Updated: Now building 2.0.17502.0
- Updated: All Dashboards are now downloaded from http://www.gxarena.com/ instead of from Homebrew Connection » Your Fastest News Source


.rar   xeBuild_GUI_2.098.rar (Größe: 27.34 MB / Downloads: 47) ]]> Swizzy's xeBuild GUI Version 2.098


>>Swizzy's veröffentlicht xeBuild GUI Version 2.098, welches nun den Kernel 17502 unterstützt.



[Bild: xeBuildGUI2.098.jpg]

Zitat:* 2098 *

*********
- Updated: Now using xeBuild 1.17
- Updated: Now using Dashlaunch 3.17
- Updated: Now building 2.0.17502.0
- Updated: All Dashboards are now downloaded from http://www.gxarena.com/ instead of from Homebrew Connection » Your Fastest News Source


.rar   xeBuild_GUI_2.098.rar (Größe: 27.34 MB / Downloads: 47) ]]> <![CDATA[xeBuild: Update Server (updsvr v3)]]> https://xbox-hilfe-forum.de/showthread.php?tid=27412 Mon, 01 Dec 2014 10:47:23 +0000 Pooly]]> https://xbox-hilfe-forum.de/showthread.php?tid=27412
Zitat:Update Server for Xebuild Client
================================

The main purpose of this xex is to simply run the built in user dll that provides
a server that xebuild communicates with. It can easily run at console boot without
any controller intervention by simply placing default.xex on the root of a FAT formatted
memory stick, and plugging the memory stick into the console before powering it on.

The built in server dll is also included in dash launch version 3.08 or greater installer GUI.

v3
- added command so client can retreive raw bootloaders (everything from 0 to first patch slot)
Quelle: xbins

Gruß
pooly

.zip   updsvr_standalone_v3.zip (Größe: 1.04 MB / Downloads: 21) ]]>
Zitat:Update Server for Xebuild Client
================================

The main purpose of this xex is to simply run the built in user dll that provides
a server that xebuild communicates with. It can easily run at console boot without
any controller intervention by simply placing default.xex on the root of a FAT formatted
memory stick, and plugging the memory stick into the console before powering it on.

The built in server dll is also included in dash launch version 3.08 or greater installer GUI.

v3
- added command so client can retreive raw bootloaders (everything from 0 to first patch slot)
Quelle: xbins

Gruß
pooly

.zip   updsvr_standalone_v3.zip (Größe: 1.04 MB / Downloads: 21) ]]> <![CDATA[Aurora - Alternatives-Dashboard für XBOX360 JTAG / RGH]]> https://xbox-hilfe-forum.de/showthread.php?tid=27148 Fri, 18 Jul 2014 09:07:41 +0000 Millhouse]]> https://xbox-hilfe-forum.de/showthread.php?tid=27148
Alternative-Dashboard für XBOX360 JTAG / RGH Aurora v0.1a


[Bild: aurora.logo.png]

Aurora, eine neues Alternative Dashboard für JTAG / RGH Xbox360.
Die Alpha-Version ist natürlich nicht vollständig, aber stabil, schnell, glatt und vollkommen funktionsfähig.





Zitat:Features:

- Booten direkt in Coverflow
- Lua-Skripte für Filter und Sortiermethoden Untertitel
- Individuelle Coverflow-Layout
- Schnellsuche Spieleliste
- Spiel Details
- Verwalten Sie Ihre Spiele-Liste, wenn Sie Ihre Geräte nicht verbunden sind
- und natürlich in vollem Einklang mit Freestyle Plugin (Link) und die neue und - Verbesserte Unity Website
- nicht/teilweise Funktionen in alpha:
- Previews anschauen / Erfolge
- Bitte senden Sie Fehler in die Support-Foren.
- Oder schauen Sie # RealModScene Efnet
[video]http://youtube.com/watch?v=BLa9QOtJ9_o&feature=related[/video]

.rar   Aurora 0.1A - Release Package - Hotfix #1.rar (Größe: 13.46 MB / Downloads: 29)

.png   aurora.logo.png (Größe: 52.36 KB / Downloads: 12) ]]>
Alternative-Dashboard für XBOX360 JTAG / RGH Aurora v0.1a


[Bild: aurora.logo.png]

Aurora, eine neues Alternative Dashboard für JTAG / RGH Xbox360.
Die Alpha-Version ist natürlich nicht vollständig, aber stabil, schnell, glatt und vollkommen funktionsfähig.





Zitat:Features:

- Booten direkt in Coverflow
- Lua-Skripte für Filter und Sortiermethoden Untertitel
- Individuelle Coverflow-Layout
- Schnellsuche Spieleliste
- Spiel Details
- Verwalten Sie Ihre Spiele-Liste, wenn Sie Ihre Geräte nicht verbunden sind
- und natürlich in vollem Einklang mit Freestyle Plugin (Link) und die neue und - Verbesserte Unity Website
- nicht/teilweise Funktionen in alpha:
- Previews anschauen / Erfolge
- Bitte senden Sie Fehler in die Support-Foren.
- Oder schauen Sie # RealModScene Efnet
[video]http://youtube.com/watch?v=BLa9QOtJ9_o&feature=related[/video]

.rar   Aurora 0.1A - Release Package - Hotfix #1.rar (Größe: 13.46 MB / Downloads: 29)

.png   aurora.logo.png (Größe: 52.36 KB / Downloads: 12) ]]> <![CDATA[AutoGG 0.9.3 Rev72]]> https://xbox-hilfe-forum.de/showthread.php?tid=27050 Wed, 02 Jul 2014 09:42:26 +0000 Millhouse]]> https://xbox-hilfe-forum.de/showthread.php?tid=27050 Mit dieser lässt sich nun auch der aktuelle Kernel, 16537, mit einem JTAG/Glitch Hack versehen.

.rar   AutoGG_0.9.3.part1.rar (Größe: 10 MB / Downloads: 19)

.rar   AutoGG_0.9.3.part2.rar (Größe: 10 MB / Downloads: 16)

.rar   AutoGG_0.9.3.part3.rar (Größe: 10 MB / Downloads: 16)

.rar   AutoGG_0.9.3.part4.rar (Größe: 8.41 MB / Downloads: 16) ]]> Mit dieser lässt sich nun auch der aktuelle Kernel, 16537, mit einem JTAG/Glitch Hack versehen.

.rar   AutoGG_0.9.3.part1.rar (Größe: 10 MB / Downloads: 19)

.rar   AutoGG_0.9.3.part2.rar (Größe: 10 MB / Downloads: 16)

.rar   AutoGG_0.9.3.part3.rar (Größe: 10 MB / Downloads: 16)

.rar   AutoGG_0.9.3.part4.rar (Größe: 8.41 MB / Downloads: 16) ]]> <![CDATA[XeBuild_QuickUpdate-XPG JTAG/RGH Update für ganz Eilige *LAN benötigt*]]> https://xbox-hilfe-forum.de/showthread.php?tid=26505 Sun, 27 Oct 2013 18:44:20 +0000 Safran]]> https://xbox-hilfe-forum.de/showthread.php?tid=26505
XeBuild_QuickUpdate-XPG (107MB):
File-Upload.net - XeBuild_QuickUpdate-XPG-.rar]]>
XeBuild_QuickUpdate-XPG (107MB):
File-Upload.net - XeBuild_QuickUpdate-XPG-.rar]]> <![CDATA[Team Xecuter Files Kein DGX mehr erforderlich bei Slim und Phat]]> https://xbox-hilfe-forum.de/showthread.php?tid=25497 Sun, 03 Mar 2013 08:46:56 +0000 stargalaxy]]> https://xbox-hilfe-forum.de/showthread.php?tid=25497 Zitat:Team Xecuter RGX (inc DGX to RGX Conversion)
March 02 2013

A few months ago we brought you DGX (Double Glitch-X) which enable the key retrieval from all slim consoles above dashboard version 15572.

The DGX was the first and only hack able to do this and worked with great success, enabling the scene to continue on with it's homebrew endeavors. For some bizarre reason some outsiders are claiming that DGX was no good and that it was too slow? The fact that there was NOTHING else that could achieve the hack and the fact that there are hundreds and hundreds of pro modders posting their success stories with boot times between 5 and 30 seconds - I guess that completely went over their heads?

In the last week a leaked bootloader has been passed around by sources who wish to remain anonymous which allows booting without knowing the CPU Key, enabling our DGX method to work with a single glitch (which is how normal RGH works). To use simply flash to the 360 using any RGH board. Naturally you will get the very best results using a CR3 Pro - or even a converted DGX

So this now opens two doors:

1. Compile a solid set of ECC's for standard RGH boards that can recover keys on Phat models Zephyr, Falcon, Jasper - and slim models Trinity & Corona (Both 16Mb v1/v3 and 4Gb v2/v4). The speed and performance will be no where near as good as the DGX hardware, but it will still work all the same. Much like the DGX, key recovery is a one time process anyway.

2. To design a new hack for the DGX hardware so that it can be converted to what we will now call RGX (Regular Glitch-X). As the DGX hardware has similar parts used by the high performance CR3 Pro, the DGX (RGX) can be used as a regular (or not so in this case) RGH board but much faster and better performance than any other 64 based board. In fact the only board out there that will perform better is the CR3 Pro - everything else it will just smoke. DGX R.I.P? Sure it is......

Files Included:

RGX ECC For Zephyr, Falcon, Jasper, Trinity & Corona
DGX to RGX XSVF Updates for Corona (3 Timing Versions)

Much more coming for DGX
Ein DGX wird hier nicht mehr benötigt ist egal welches Dashboard man drauf hat um xell zum booten.
ist für Slim und fhat.
bei Fhat nach RGH2 Verlöten
dann ist unter files noch 3 files für Corona (Timing Files)

.rar   TX RGX files.rar (Größe: 1.33 MB / Downloads: 62) ]]> Zitat:Team Xecuter RGX (inc DGX to RGX Conversion)
March 02 2013

A few months ago we brought you DGX (Double Glitch-X) which enable the key retrieval from all slim consoles above dashboard version 15572.

The DGX was the first and only hack able to do this and worked with great success, enabling the scene to continue on with it's homebrew endeavors. For some bizarre reason some outsiders are claiming that DGX was no good and that it was too slow? The fact that there was NOTHING else that could achieve the hack and the fact that there are hundreds and hundreds of pro modders posting their success stories with boot times between 5 and 30 seconds - I guess that completely went over their heads?

In the last week a leaked bootloader has been passed around by sources who wish to remain anonymous which allows booting without knowing the CPU Key, enabling our DGX method to work with a single glitch (which is how normal RGH works). To use simply flash to the 360 using any RGH board. Naturally you will get the very best results using a CR3 Pro - or even a converted DGX

So this now opens two doors:

1. Compile a solid set of ECC's for standard RGH boards that can recover keys on Phat models Zephyr, Falcon, Jasper - and slim models Trinity & Corona (Both 16Mb v1/v3 and 4Gb v2/v4). The speed and performance will be no where near as good as the DGX hardware, but it will still work all the same. Much like the DGX, key recovery is a one time process anyway.

2. To design a new hack for the DGX hardware so that it can be converted to what we will now call RGX (Regular Glitch-X). As the DGX hardware has similar parts used by the high performance CR3 Pro, the DGX (RGX) can be used as a regular (or not so in this case) RGH board but much faster and better performance than any other 64 based board. In fact the only board out there that will perform better is the CR3 Pro - everything else it will just smoke. DGX R.I.P? Sure it is......

Files Included:

RGX ECC For Zephyr, Falcon, Jasper, Trinity & Corona
DGX to RGX XSVF Updates for Corona (3 Timing Versions)

Much more coming for DGX
Ein DGX wird hier nicht mehr benötigt ist egal welches Dashboard man drauf hat um xell zum booten.
ist für Slim und fhat.
bei Fhat nach RGH2 Verlöten
dann ist unter files noch 3 files für Corona (Timing Files)

.rar   TX RGX files.rar (Größe: 1.33 MB / Downloads: 62) ]]> <![CDATA[Alternative Corona DGX Files [4GB/16mb]]]> https://xbox-hilfe-forum.de/showthread.php?tid=25061 Wed, 26 Dec 2012 15:19:58 +0000 Screamo]]> https://xbox-hilfe-forum.de/showthread.php?tid=25061
Diese alternativen ECC werden dann benötigt wenn zb Xell nicht bootet bzw keine IP zugewiesen wird.

Per Monitor Com Log würde dieses so aussehen:

Zitat:XeLL - First stage
* Attempting to wakeup all CPUs...
CPUs online: 01..
CPUs online: 3f..
* success.
* Decompressing stage 2...
* Loading ELF file...
0x00000000 0x0003ae28, Loading .text...done
0x0003ae28 0x000007c0, Loading .elfldr...done
0x0003b5e8 0x00006370, Loading .data...done
0x00041958 0x00000228, Loading .got2...done
0x00041b80 0x0000007c, Loading .sdata...done
0x00041c00 0x00009480, Loading .rodata...done
0x0004b080 0x000000e4, Loading .eh_frame_hdr...done
0x0004b164 0x00000584, Loading .eh_frame...done
0x0004b700 0x007982ec, Clearing .bss...done
0x007e39ec 0x000000ac, Clearing .sbss...done
* GO (entrypoint: 000000000000ab00)
Xenos GPU ID=5841
unknown SMC bulk msg
DVD cover state: 62
AVPACK detected: 5c
. ana disable
. ana enable
.................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. ..................................................

Quelle

.rar   CORONA_4GB_DGXv2.rar (Größe: 464.23 KB / Downloads: 13)

.rar   CORONA_16MB_DGXv2.rar (Größe: 471.16 KB / Downloads: 5) ]]>
Diese alternativen ECC werden dann benötigt wenn zb Xell nicht bootet bzw keine IP zugewiesen wird.

Per Monitor Com Log würde dieses so aussehen:

Zitat:XeLL - First stage
* Attempting to wakeup all CPUs...
CPUs online: 01..
CPUs online: 3f..
* success.
* Decompressing stage 2...
* Loading ELF file...
0x00000000 0x0003ae28, Loading .text...done
0x0003ae28 0x000007c0, Loading .elfldr...done
0x0003b5e8 0x00006370, Loading .data...done
0x00041958 0x00000228, Loading .got2...done
0x00041b80 0x0000007c, Loading .sdata...done
0x00041c00 0x00009480, Loading .rodata...done
0x0004b080 0x000000e4, Loading .eh_frame_hdr...done
0x0004b164 0x00000584, Loading .eh_frame...done
0x0004b700 0x007982ec, Clearing .bss...done
0x007e39ec 0x000000ac, Clearing .sbss...done
* GO (entrypoint: 000000000000ab00)
Xenos GPU ID=5841
unknown SMC bulk msg
DVD cover state: 62
AVPACK detected: 5c
. ana disable
. ana enable
.................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. ..................................................

Quelle

.rar   CORONA_4GB_DGXv2.rar (Größe: 464.23 KB / Downloads: 13)

.rar   CORONA_16MB_DGXv2.rar (Größe: 471.16 KB / Downloads: 5) ]]> <![CDATA[360 HackBox Lite v2.0.12.5]]> https://xbox-hilfe-forum.de/showthread.php?tid=24034 Wed, 15 Aug 2012 16:27:13 +0000 Screamo]]> https://xbox-hilfe-forum.de/showthread.php?tid=24034 360 HackBox Lite v2.0.12.5

360hackBox ist eine kleine abkupferung des J-Runners, mit diesem könnt Ihr euren Xbox360 NAND auslesen/flashen und auch Glitch Chips beschreiben.

[Bild: hackbox_v2.png]

ChangeLog:

v2.0.12.5

- Arreglado el flasheador de Xell para placas Corona
- Implementado "Drag and Drop"
- Sale de fase beta

.zip   360-HackBox Lite v2.0.zip (Größe: 904.09 KB / Downloads: 37) ]]> 360 HackBox Lite v2.0.12.5

360hackBox ist eine kleine abkupferung des J-Runners, mit diesem könnt Ihr euren Xbox360 NAND auslesen/flashen und auch Glitch Chips beschreiben.

[Bild: hackbox_v2.png]

ChangeLog:

v2.0.12.5

- Arreglado el flasheador de Xell para placas Corona
- Implementado "Drag and Drop"
- Sale de fase beta

.zip   360-HackBox Lite v2.0.zip (Größe: 904.09 KB / Downloads: 37) ]]> <![CDATA[RGH 2.0 Hack -> Team XeCuter]]> https://xbox-hilfe-forum.de/showthread.php?tid=23193 Mon, 16 Apr 2012 11:21:58 +0000 Screamo]]> https://xbox-hilfe-forum.de/showthread.php?tid=23193
Mit dem Paket ist es nun wieder möglich alle Phat Konsolen umzubauen, die ein größeres Dashboard/Kernel haben. Zudem ist es nun möglich alle nicht Glitchfähigen Konsolen zu glitchen.

[spoiler]Team Xecuter RGH2.0 For CoolRunner Rev A and B

We were not quite ready to release this due to it's unstable boot times on older glitch hardware, but as our code was leaked from a team member AGAIN we had to release this due to another team stealing the code and claiming as their own work. They were even too lazy to change any of the patches to make it look like their own – they are 1:1 same as our original sources. Super lame. It seems some teams think this is the Wii or PlayStation scene and you can act like this. They don't even give credits to cOz for his SMC patcher – because they didn't even know that code was from him of course.

We don't want to get dragged down into bullshit scene politics – most of you won't care anyway, but a lot of guys work very hard on this stuff only to have it stolen with no effort and no credits is just sad. Anyway……

The Xecuter RGH Development Team are pleased to announce the official release of the RGH2.0 hack for all CoolRunner Rev A and Rev B dev boards. All Phat consoles have now been defeated and are totally glitch-able without having a previous NAND dump or CPU KEY (the same applies to Slim Trinity that have been updated to 14717/14719).

We have included all of the build.py and xebuild scripts for your convenience. Please give the correct credits if you use our work.

Xecuter RGH2.0 Features introduced:

Hack now works on new CB's (14717/14719 update)
Hack now works with all Refurbished Split CB's (4577, 5772, 6752)
Zephyr CB 4578, 4575, 4577
Falcon/Opus CB 5771, 5772, 5773
Jasper CB 6750, 6752, 6753
Trinity (Slim) CB 9188, 9230

To confirm, we can now glitch Phats with any kernel and any bootloader. As soon as you have your CPU KEY, and you are using an Xecuter DemoN you will ALWAYS be able to switch to a fully hacked NAND and it can never be stopped no matter what update you apply and no matter which efuses are blown ! [/spoiler]

Quelle: Team Xecuter - Rocking The Xbox Since 2002

gruß Screamo

.rar   Xecuter_RGH2_Official.rar (Größe: 1.77 MB / Downloads: 86) ]]>
Mit dem Paket ist es nun wieder möglich alle Phat Konsolen umzubauen, die ein größeres Dashboard/Kernel haben. Zudem ist es nun möglich alle nicht Glitchfähigen Konsolen zu glitchen.

[spoiler]Team Xecuter RGH2.0 For CoolRunner Rev A and B

We were not quite ready to release this due to it's unstable boot times on older glitch hardware, but as our code was leaked from a team member AGAIN we had to release this due to another team stealing the code and claiming as their own work. They were even too lazy to change any of the patches to make it look like their own – they are 1:1 same as our original sources. Super lame. It seems some teams think this is the Wii or PlayStation scene and you can act like this. They don't even give credits to cOz for his SMC patcher – because they didn't even know that code was from him of course.

We don't want to get dragged down into bullshit scene politics – most of you won't care anyway, but a lot of guys work very hard on this stuff only to have it stolen with no effort and no credits is just sad. Anyway……

The Xecuter RGH Development Team are pleased to announce the official release of the RGH2.0 hack for all CoolRunner Rev A and Rev B dev boards. All Phat consoles have now been defeated and are totally glitch-able without having a previous NAND dump or CPU KEY (the same applies to Slim Trinity that have been updated to 14717/14719).

We have included all of the build.py and xebuild scripts for your convenience. Please give the correct credits if you use our work.

Xecuter RGH2.0 Features introduced:

Hack now works on new CB's (14717/14719 update)
Hack now works with all Refurbished Split CB's (4577, 5772, 6752)
Zephyr CB 4578, 4575, 4577
Falcon/Opus CB 5771, 5772, 5773
Jasper CB 6750, 6752, 6753
Trinity (Slim) CB 9188, 9230

To confirm, we can now glitch Phats with any kernel and any bootloader. As soon as you have your CPU KEY, and you are using an Xecuter DemoN you will ALWAYS be able to switch to a fully hacked NAND and it can never be stopped no matter what update you apply and no matter which efuses are blown ! [/spoiler]

Quelle: Team Xecuter - Rocking The Xbox Since 2002

gruß Screamo

.rar   Xecuter_RGH2_Official.rar (Größe: 1.77 MB / Downloads: 86) ]]> <![CDATA[xeBuilder v2 by Screamo -> 14717]]> https://xbox-hilfe-forum.de/showthread.php?tid=22617 Tue, 21 Feb 2012 19:30:06 +0000 Screamo]]> https://xbox-hilfe-forum.de/showthread.php?tid=22617
Changelog :

Add Dash 14717
Add DashLaunch 2.30

Mit dem Builder könnt Ihr Reset Glitch sowie JTAG Images erstellen.

Anleitung:

1.Nand Datei in Nanddump.bin umbenennen
2.Nanddump.bin ins root vom xeBuilder ablegen
3.xeBuilder by Screamo.exe starten und Schritt für Schritt der Anleitung folgen

Programm habe ich ausgibig getestet, sowohl auf PHAT(JTAG/Glitch) und Slim Konsolen(RGH).

gruß

.rar   xeBuilder 2 by Screamo 14717.part1.rar (Größe: 9 MB / Downloads: 44)

.rar   xeBuilder 2 by Screamo 14717.part2.rar (Größe: 6.88 MB / Downloads: 44) ]]>
Changelog :

Add Dash 14717
Add DashLaunch 2.30

Mit dem Builder könnt Ihr Reset Glitch sowie JTAG Images erstellen.

Anleitung:

1.Nand Datei in Nanddump.bin umbenennen
2.Nanddump.bin ins root vom xeBuilder ablegen
3.xeBuilder by Screamo.exe starten und Schritt für Schritt der Anleitung folgen

Programm habe ich ausgibig getestet, sowohl auf PHAT(JTAG/Glitch) und Slim Konsolen(RGH).

gruß

.rar   xeBuilder 2 by Screamo 14717.part1.rar (Größe: 9 MB / Downloads: 44)

.rar   xeBuilder 2 by Screamo 14717.part2.rar (Größe: 6.88 MB / Downloads: 44) ]]>