IMGB/CLONE bringen fehler beim Brennen

[19momo87]

Hi zusammen, ich bin noch am verzweifeln, hab jetzt schon 4 Rohlinge verbrannt! Gestern noch habe ich mir einen Platinum Rohling geholt, gebrannt, kein Problem, dann heute wieder versucht zu Brennen (aus nem 25er Spindel), beim ersten Rohling auch kein Problem. Dann das nächste Spiel versucht, fehlgeschlagen und zwar kam von
img burn der Fehler:
I 00:44:51 ImgBurn Version 2.5.0.0 started!
I 00:44:51 Microsoft Windows Vista Home Premium Edition (6.0, Build 6000)
I 00:44:51 Total Physical Memory: 2.094.912 KB - Available: 822.784 KB
W 00:44:51 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 00:44:51 Initialising SPTI...
I 00:44:51 Searching for SCSI / ATAPI devices...
I 00:44:51 Found 1 DVD±RW/RAM!
I 00:49:32 Operation Started!
I 00:49:32 Source File: C:\Users\Michael\Desktop\Amped 3.dvd
I 00:49:32 Source File Sectors: 3.825.631 (MODE1/2048)
I 00:49:32 Source File Size: 7.834.892.288 bytes
I 00:49:32 Source File Volume Identifier: XBOX360
I 00:49:32 Source File Volume Set Identifier: 33479a57
I 00:49:32 Source File Implementation Identifier: Daikin U.S. Comtec Lab
I 00:49:32 Source File File System(s): ISO9660; UDF (1.02)
I 00:49:32 Destination Device: [1:0:0] HL-DT-ST DVDRAM GSA-T20N WM01 (F (ATA)
I 00:49:32 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2,4x; 4x; 6x)
I 00:49:32 Destination Media Sectors: 4.173.824
I 00:49:32 Write Mode: DVD
I 00:49:32 Write Type: DAO
I 00:49:32 Write Speed: 2,4x
I 00:49:32 Link Size: Auto
I 00:49:32 Lock Volume: Yes
I 00:49:32 Test Mode: No
I 00:49:32 OPC: No
I 00:49:32 BURN-Proof: Enabled
I 00:49:33 Book Type Setting: N/A
I 00:49:33 User Specified L0 Data Zone Capacity: 1.913.760
I 00:51:37 Set L0 Data Zone Capacity Succeeded!
I 00:51:38 Filling Buffer... (40 MB)
I 00:51:39 Writing LeadIn...
I 00:51:44 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825630)
I 00:51:44 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825630)
I 00:51:44 Writing Layer 0... (LBA: 0 - 1913759)
W 01:02:43 Failed to Write Sectors 1061664 - 1061695 - Reason: Tracking Servo Failure
W 01:02:43 Retrying (1 of 20)...
W 01:02:43 Retry Failed - Reason: Invalid Address For Write
W 01:02:43 Retrying (2 of 20)...
W 01:02:43 Retry Failed - Reason: Invalid Address For Write
W 01:02:43 Retrying (3 of 20)...
W 01:02:43 Retry Failed - Reason: Invalid Address For Write
W 01:02:43 Retrying (4 of 20)...
W 01:02:43 Retry Failed - Reason: Invalid Address For Write
W 01:02:43 Retrying (5 of 20)...
W 01:02:43 Retry Failed - Reason: Invalid Address For Write
W 01:02:43 Retrying (6 of 20)...
W 01:02:43 Retry Failed - Reason: Invalid Address For Write
W 01:02:43 Retrying (7 of 20)...
W 01:02:43 Retry Failed - Reason: Invalid Address For Write
W 01:02:43 Retrying (8 of 20)...
W 01:02:43 Retry Failed - Reason: Invalid Address For Write
W 01:02:43 Retrying (9 of 20)...
W 01:02:43 Retry Failed - Reason: Invalid Address For Write
W 01:02:43 Retrying (10 of 20)...
W 01:02:43 Retry Failed - Reason: Invalid Address For Write
W 01:02:43 Retrying (11 of 20)...
W 01:02:43 Retry Failed - Reason: Invalid Address For Write
W 01:02:43 Retrying (12 of 20)...
W 01:02:43 Retry Failed - Reason: Invalid Address For Write
W 01:02:43 Retrying (13 of 20)...
W 01:02:43 Retry Failed - Reason: Invalid Address For Write
W 01:02:43 Retrying (14 of 20)...
W 01:02:43 Retry Failed - Reason: Invalid Address For Write
W 01:02:43 Retrying (15 of 20)...
W 01:02:43 Retry Failed - Reason: Invalid Address For Write
W 01:02:43 Retrying (16 of 20)...
W 01:02:43 Retry Failed - Reason: Invalid Address For Write
W 01:02:43 Retrying (17 of 20)...
W 01:02:43 Retry Failed - Reason: Invalid Address For Write
W 01:02:43 Retrying (18 of 20)...
W 01:02:43 Retry Failed - Reason: Invalid Address For Write
W 01:02:43 Retrying (19 of 20)...
W 01:02:43 Retry Failed - Reason: Invalid Address For Write
W 01:02:43 Retrying (20 of 20)...
W 01:02:43 Retry Failed - Reason: Invalid Address For Write
W 01:03:48 Retrying (21)...
W 01:03:48 Retry Failed - Reason: Invalid Address For Write
W 01:03:49 Retrying (22)...
W 01:03:49 Retry Failed - Reason: Invalid Address For Write
E 01:03:50 Failed to Write Sectors 1061664 - 1061695 - Reason: Tracking Servo Failure
E 01:03:50 Next Writable Address: 1061120
I 01:03:50 Synchronising Cache...
I 01:04:03 Closing Track...
I 01:04:07 Finalising Disc...
W 01:04:29 Potential 'WaitImmediateIO' Deferred Error - (1%, 0/3) - Tracking Servo Failure
W 01:04:29 Finalise Disc Failed! - Reason: Tracking Servo Failure
W 01:04:29 Retrying (1 of 3)...
E 01:04:30 Failed to Write Image!
I 01:04:30 Exporting Graph Data...
I 01:04:30 Graph Data File: C:\Users\Michael\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GSA-T20N_WM01_DIENSTAG-3-NOVEMBER-2009_00-49_RITEK-S04-66_2,4x.ibg
I 01:04:30 Export Successfully Completed!
E 01:04:30 Operation Failed! - Duration: 00:14:57
I 01:04:30 Average Write Rate: 2.928 KB/s (2.1x) - Maximum Write Rate: 3.408 KB/s (2.5x)
I 01:04:43 Close Request Acknowledged
I 01:04:43 Closing Down...
I 01:04:43 Shutting down SPTI...
I 01:04:43 ImgBurn closed!




bei Clone Cd kommt der Fehler:
I 20:07:24 CloneCD Version 5.3.1.4 wurde gestartet!
I 20:07:25 ElbyCDIO Driver 6.0.3.2
I 20:07:26 ElbyCDIO.dll 6.0.8.7
I 20:07:26 CCDDriver.dll 5.3.0.1
I 20:07:26 ElbyECC.dll 4.0.0.0
I 20:07:26 WriteDVD.dll 2.6.6.3
W 20:07:33 Registriert auf: NICHT REGISTRIERT!
W 20:07:33 Noch 21 Tage von 21 Tagen zum Probieren übrig!
I 20:07:33 Suche nach SCSI/ATAPI Geräten...
I 20:07:39 0 Lesegerät und 1 Schreibgerät wurden gefunden!
I 20:10:43 Starte kopieren von K:\Games\Tony Hawk´s American Wasteland.dvd nach HL-DT-ST DVDRAM GSA-T20N
I 20:10:43 Schreibgeschwindigkeit: 2x
I 20:10:43 Schreibe Session 1 LeadIn...
I 20:13:39 Schreibe Session 1 Imagedatei...
I 20:34:25 Dauer des Vorgangs: 00:23:42
I 20:34:25 Durchschnittliche Geschwindigkeit: 2368 kBytes/s (1.75)
E 20:34:28 Schreiben auf HL-DT-ST DVDRAM GSA-T20N fehlgeschlagen!

was soll ich tun?

0 Danksagungen

[FancyFear]

Da sich das bei dir um nen Brenner von LG handelt würde ich rein spontan daaruf tippen, das dein Brenner im Eimer ist. Wird wohl der Laser sein. Was du vielleicht noch tun könntest, probier mal andere Rohlinge, wenn das nicht hilft...Brenner raus, umtauschen (wenn noch Garantie drauf ist), neuen mitnehmen und fertig.

0 Danksagungen

[19momo87]

also lag an den sch* rohlingen! vom 25er spindel gingen grad mal 10 stück, der rest ist verburnt! jetzt kauf ich nur noch einzelne!

0 Danksagungen

[FancyFear]

Kauf dir Verbatim Rohlinge, die sind zwar teurer aber dafür hast du sogut wie keinen Ausschuss.

0 Danksagungen